Orbcomm Isat Data Pro Terminals

Orbcomm IsatData Pro (IDP) is a message-based satellite IoT service utilizing the Viasat satellite network.
It’s a highly cost-effective way of sending and receiving small amounts of IoT data; ideal for fixed
IoT applications such as Mining, Oil & Gas, Utilities, Renewables, Agriculture, and Environmental Monitoring.

It’s unaffected by weather conditions, and IDP terminals draw very little power, running on
battery power for several years. IDP is a low latency (15-60 seconds) service with almost global
coverage; only the polar regions are not served.

6,400

Bytes Send

10,000

Bytes Receive

15-60

Seconds Latency*

*Depending on message size

BGAN-CoverageMap

Orbcomm IsatData Pro (IDP) Coverage

Orbcomm IDP utilizes Viasat’s satellites which are positioned in geostationary orbit. At 35,786 Km up, they move at the same speed as the Earth rotates, so appear stationary to us – hence the name! At this distance, they can ‘see’ a lot of the Earth’s surface, so a small number of satellites are needed to provide close to global coverage. IDP currently operates on six L-band satellites, which deliver coverage everywhere with the exception of the polar regions.

There are several benefits of GEO satellites. Once you’re connected to the satellite, if your asset isn’t moving around, the connection will be extremely stable. If it *is* moving around, you will need an auto-pointing or omni-directional antenna that can adjust to your asset’s position relative to the satellite. The devices we’ve featured on this page have omni-directional antennae built in.

GEO services tend to be lower cost than comparative LEO (Low Earth Orbit) satellite airtime plans, so it’s often a very cost-effective option.

IDP Coverage Map

Benefits of Orbcomm IsatData Pro (IDP)

IDP is a message-based airtime service, which is a very cost-effective way of using the space segment. Utilizing the tried and trusted Viasat satellite network, it's secure, reliable, and scalable.

Talk to our team if you'd like some advice on whether IDP is the best satellite airtime service for your requirements; we have 20 years' experience in satellite IoT, and we're here to help.

99.9% Service Availability

IsatData Pro utilizes the L-band radio frequency, which is licensed (so you don't have to worry about congestion slowing down transmissions), & unaffected by weather conditions.

Low Operating Costs

IDP ensures predictable data usage with minimal overhead, pooling data within each rate plan to avoid unexpected costs. There's great flexibility for IoT solutions, scaling from initial pilots to large deployments.

Energy Efficient Terminals

As a message-based service, IDP is event-driven, which means it's not only low cost (sending only what you need, when you need it), it also draws much less power than 'always on' solutions.

15-60 Second Latency

Latency - the time it takes for the message to leave the terminal and travel via the satellite to your server - is just 15-60 seconds with IDP - depending on the message size. This is very fast for a GEO satellite network!

Broad Coverage

Viasat's satellite network covers most of the planet, with only the polar regions excluded. This means you can access the service without roaming charges, as long as you have line of sight to a satellite.

The next generation of IoT satellite connectivity from Orbcomm

Coming Soon: OGx

With messaging speeds up to 40x faster*, lower latency and an increase in message size up to 1MB, OGx will open up new satellite IoT and asset tracking use cases which require imaging, large data logs or over-the-air updates.

Featuring a suite of flexible, cost-effective data plans, OGx is compatible with existing Orbcomm ST-series satellite terminals and helps to reduce overall power consumption, expanding the possibilities of using smaller components, utilizing smaller battery packs or solar panels arrays, or increasing the frequency of data transmissions.

*Compared to Orbcomms current generation of satellite IoT services

ORBCOMM-OGx-Promotional-Image

Comparing Satellite IoT Connectivity

It’s tricky to compare airtime services because so much depends on how much data you need to send, but as a rough guide, we’ve put together the following comparison points. Get in touch if you’d like any help deciding what will work best for you.

Service:
Orbcomm IDP
Iridium SBD
Iridium Certus 100
Inmarsat BGAN M2M
Connection Type:
Message-Based
Message-Based
IP-Based
IP-Based
Typical Connection Speed:
6.4 / 10 kB per Message
270 / 320 B per Message
22 / 88 Kbps
448 / 464 Kbps
Satellite Orbit:
Geo-stationary (GEO)
Low Earth Orbit (LEO)
Low Earth Orbit (LEO)
Geo-stationary (GEO)
Latency:
Low
Very Low
Very Low
Low
Total Cost of Ownership:
Lowest
Very Low
Medium
Low
Power Usage:
Very Low
Very Low
Low
Low
Connection Frequency:
On Demand
On Demand
Frequently Connected
Frequently Connected
Great For:
Small amounts of data from individual sensors
Very small amounts of data from individual sensors
Fixed or mobile IoT applications which require IP connection
Fixed IoT applications with larger amounts of data to transfer via an IP connection

How can we help?

If you’re developing a remote IoT application and need to explore your connectivity options, Ground Control can help. We design and build our own satellite IoT hardware and services platform, Cloudloop, and work with trusted third parties when they have a great product, like the Orbcomm devices we’ve featured on this page.

We can offer you expert, impartial advice on the best satellite network and device for your requirements. Just complete the form or email hello@groundcontrol.com, and we’ll come back to you within one working day.

Please enable JavaScript in your browser to complete this form.
Name
Privacy Policy