Small, Cost-Effective Asset Tracker
The SmartOne C is a compact, cost-effective yet feature-rich device for tracking and monitoring assets in remote locations using the Globalstar LEO satellite network.
Designed to be easily installed on to the exterior of valuable assets, the SmartOne C is a discreet satellite-enabled tracker that can be line-powered or utilize AAA 1.5v lithium batteries for applications when a power supply is limited or unavailable.
With 12 different reporting times, interval or 24 hour operating modes and the ability to build custom schedules and alerts, the SmartOnce C is a highly adaptable asset tracker to meet a wide variety of requirements.
![Shipping Container lorry](https://www.groundcontrol.com/wp-content/uploads/2024/08/Shipping-Container-lorry.jpg)
![Shipping Container lorry](https://www.groundcontrol.com/wp-content/uploads/2024/08/Shipping-Container-lorry.jpg)
Contact us
![construction excavator remote location](https://www.groundcontrol.com/wp-content/uploads/2024/08/construction-excavator-remote-location.jpg)
![construction excavator remote location](https://www.groundcontrol.com/wp-content/uploads/2024/08/construction-excavator-remote-location.jpg)
Feature Rich Asset Monitoring
The SmartOne C is equipped with motion sensors, GPS capability and custom configured sensors, and can provide near real-time updates or triggered alerts using cost-effective short burst messages via the Globalstar satellite network.
Asset tracking managers can continuously monitor their containers as they move between different shipping methods, such as from ships to trains to lorries. Those concerned about unauthorised movements or thefts of high value assets can set up a geofence which increases the frequency of location information when an asset moves outside of its intended range. Equipment managers can trigger maintenance operations based on hours of operation to prevent costly machinery breakdowns. The SmartOne C can also connect to onboard sensors and switches via line inputs to send status updates, such as vehicle ignition switches or container door sensors.
Contact us
- Utilizes the Globalstar LEO Satellite Network
- Globalstar Simplex usage plans – single package messages = 9 bytes per message
- Powered by line input or AAA lithium batteries
- Up to 12 different reporting times
- Interval or 24-hour operation mode
- Easy to install and portable between assets
- Compact form factor with no requirement for external antenna
- IP68 rated rugged design for external use
- Supports geofencing, speed monitoring, and movement alerts
- Configurable to individual asset requirements
- Two dry contact inputs, to manage run time of engines and/or other alarm inputs
- One serial port for passive and smart sensors.
Satellite Communication
- Typical latency: 60ms
- Elevation angle: 52°
- Frequency: Tx: 1611.25 Mhz – 1618.75 Mhz
- EIRP: 23.46 dBm
Certification
- Regulatory: FCC, ISED, CE, UKCA, ACMA, ANATEL, ENACOM, NOM, MTC, ARECOM, NCC, ICASA, TELEC, KCC, NTC, ITU (GMPCS)
Power Supply
- 5v DC or 8-24V Input Cable with regulator battery type
- AAA Lithium 1.5 V batteries x 4 (included) – Provides 1.5+ years of battery life
Dimensions
- 0.69 x 0.83 x 0.25 cm (2.70 x 3.25 x 1.00″)
Environmental
- Operating temperature: -30° to +60° C
- Dust and water ingress: IP68
Can we help?
If you are planning a remote IoT and/or tracking application, and you’d like some advice on the best device and satellite airtime for your needs, get in touch! We have been delivering remote connectivity solutions for over 20 years, and design and build our own hardware. We also – as in this case – work with third parties when they have a great product, so we can always pair our customers with the right solution for their needs.
Complete the form or email hello@groundcontrol.com; we have offices in both the UK and USA, and we’re standing by to help.